
Product Brief – JN5139-xxx-Myy
IEEE802.15.4/ZigBee Module Family
Overview
The JN5139-xxx-Myy family is a range of surface mount modules that enables users
Features: Module
to implement systems using Jennic’s own JenNet networking stack, IEEE802.15.4 or
ZigBee with minimum time to market and at the lowest cost. They remove the need
for expensive and lengthy development of custom RF board designs and test suites.
The modules use Jennic’s JN5139 wireless microcontroller to provide a
comprehensive solution with high radio performance and all RF components are
included. All that is required to develop and manufacture wireless control or sensing
products is to connect a power supply and peripherals such as switches, actuators
and sensors, considerably simplifying product development.
Three basic hardware module variants are available: JN5139-xxx-M00 with an
integrated antenna, JN5139-xxx-M01/M03 with an antenna connector and JN5139-
xxx-M02/M04 with a power amplifier and LNA for extended range. Each variant can
be provided pre-programmed with a ZigBee network stack (JN5139-Z01-Myy).
Module Block Diagram
128kB Serial Flash
?
?
?
?
?
2.4GHz IEEE802.15.4 and ZigBee
compatible
2.7-3.6V operation
Sleep current (with active sleep
timer) 2.6μA
JN5139-xxx-M00/01/03
up to 1km range
M00: on board antenna
M01: SMA connector
M03: uFl connector
o Receiver sensitivity -96dBm
o TX power +2.5dBm
o TX current 37mA
o RX current 37mA
o 18x30mm
JN5139-xxx-M02/04
up to 4km range
M02: SMA connector
XTAL
Memory
M04: uFl connector
o Receiver sensitivity -100dBm
Ceramic Antenna
Balun
JN5139 chip
RAM
96kB
ROM
192kB
SPI
o TX power +19dBm
External
Antenna
Connector
M00 Option
Balun
M01/03 Option
2.4GHz
Radio
O-QPSK
Modem
IEEE802.15.4
RISC CPU
2-wire serial
Timers
o TX current 125mA
o RX current 45mA
o 18x41mm
MAC
UARTs
Connector
Balun
PA / LNA
Accelerator
12-bit ADC,
comparators
Features: Microcontroller
M02/04 Option
Power
Management
128-bit AES
Encryption
Accelerator
11-bit DACs,
temp sensor
?
16MHz 32-bit RISC CPU
Power
?
?
96kB RAM, 192kB ROM
4-input 12-bit ADC, 2 11-bit DACs,
2 comparators, temperature
sensor
Benefits
Applications
?
2 Application timer/counters,
?
Microminiature module solutions
?
Robust and secure low power
3 system timers
?
?
?
?
Ready to use in products
Minimises product development
time
No RF test required for systems
Compliant with FCC part 15
rules, ETSI ETS 300-328 and
Japan ARIB STD-T66
?
?
?
wireless applications
Wireless sensor networks,
particularly IEEE802.15.4 /
ZigBee systems
Home and commercial building
automation
Home networks
?
?
?
?
?
2 UARTs (one for in-system
debug)
SPI port with 5 selects
2-wire serial interface
21 GPIO
Evaluation kits available with full,
unlimited, Software Development
?
Production volumes supplied
pre-programmed with
application software
?
?
?
Toys and gaming peripherals
Industrial systems
Telemetry and utilities
Kit
Temperature range
-20°C to +70°C
(e.g. AMR)
Lead-free and RoHS compliant
? Jennic Ltd 2008 – www.jennic.com
JN5139-xxx-MOyy-PB v 1.2
Page 1 of 2